Service & Repair Tools - PAGE: 2
Page 2 of 2 (17 items)
Use this Briggs & Stratton valve spring compressor to remove and install valve springs with ease.
The jaws are adjustable to a maximum width of 30mm to accommodate springs of varying diameters.
Suitable for use on most 'small' engines.
£10.80
Connected between the high-tension lead and an engine ground or the spark plug, this tester allows you to test the ignition on a Briggs & Stratton engine with ease.
£13.18
Use this special suction tool to lap valves.
Suitable for use on most engines (subject to the suction cup sizes).
Small suction cup diameter - 3/4”.
Large suction cup diameter - 1 1/4”.
£14.62
This Briggs & Stratton tachometer will tell you the revolutions per minute that your engine (or any other piece of rotating machinery) is running at.
Suitable for use on most engines, very accurate and simple to use.
Range - 800 - 50,000 RPM.
Frequency of 14 - 750 hertz can also be measured.
£16.06
Briggs & Stratton’s otoscope is perfect for looking into the small passages and jets of carburettors.
The otoscope gives 2x magnification and is fitted with a built in light to illuminate the area being examined.
£16.62
The Briggs & Stratton DC Shunt uses the simple relationship between voltage, current and resistance to allow the testing of alternator output using millivolts rather than amperes.
A multi-meter capable of measuring millivolts is required.
£39.00
Briggs & Stratton torque wrench with a range of 0 - 300 inch pounds / 0 - 346.8kgcm / 0 - 34Nm.
£61.14
Page 2 of 2 (17 items)